Waste Management • PetrochemicalsMTCGeri Dönüşüm

WASTE MANAGEMENT AND PETROCHEMICALS

We Turn Waste Into Value

We collect your hazardous and non-hazardous waste with licensed vehicles and turn it back into raw material at our own plant. Every shipment is documented.

LICENSED RECOVERY

  • Waste Management
  • Waste Oil Recovery
  • Plastic Recycling
  • Metal Recovery
  • Environmental Consultancy

OUR SERVICES

The most requested waste and recovery services.

OUR DIVISIONS

Waste Management

We run the whole chain in one place — from segregating hazardous and non-hazardous waste at your site to recovering it at a licensed facility. A company’s waste obligation does not end with placing a container: it needs the correct waste code, suitable temporary storage, licensed transport and, at the end, a documented disposal or recovery. If any of these steps is missing, liability stays with the producer during an audit.

3 services

Petrochemicals and Waste Oil Recovery

Waste mineral oil is not a residue to be burned off; processed properly it becomes base oil again. Waste oil collected from industrial plants, fuel stations and service shops goes through dewatering, separation and refining at our facility, and the resulting base oil returns to industry. Drums, filters and contaminated packaging that held oil are taken in the same shipment.

3 services

Plastic Recycling

Production scrap, rejected parts, stretch film and industrial packaging are raw material to us. We separate PE, PP, PET and PS by type and run them through our shredding, washing and granulation lines to produce material fit for manufacturing again. We pay for your material at scrap value and document each shipment with a weighed delivery note.

3 services

Metal and Scrap Recovery

Collection, weighing and grade-by-grade sorting of steel, aluminium, copper, brass and stainless scrap from your site. Swarf, sheet offcuts, profile remnants and dismantling material are covered too. Waste electrical and electronic equipment is handled on a separate line, broken down to boards and cable and routed to precious metal recovery. The Osmaniye–İskenderun corridor we sit on is the centre of Türkiye’s iron and steel production, and the electric arc furnaces here run directly on scrap. Your scrap does not pass through a broker — it goes to a mill a few hours away. The haulage line shrinks and the figure you get per tonne grows.

2 services

Environmental Consultancy and Zero Waste

Moving the waste is half the job; the other half is paperwork. Zero-waste certification, the annual waste declaration, packaging notifications and the audit file are where most companies fall behind. Because we already collect your waste, we can run these items without gathering data twice — staff training and the on-site segregation layout are part of the same work.

3 services

WHY MTC?
EVERY STEP OF THE WASTE IS ON RECORD.

01

LICENSED COLLECTION AND TRANSPORT

Waste is collected with vehicles licensed by the Ministry of Environment; transport is registered through the national waste tracking system and the record is delivered to you after each shipment.

02

IT STARTS WITH ANALYSIS

Every job begins by sampling the waste and identifying its code and content. Neither the route nor the price is fixed before the code is confirmed.

03

RECOVERY IN OUR OWN PLANT

Waste oil, plastic and metal are processed in our own facility without intermediaries, so we can show where the waste went and what it became.

04

AUDIT-READY REPORTING

Annual waste declarations, zero-waste reporting and disposal/recovery certificates are filed regularly.

HOW WE WORK

First we identify the waste.
Then we map its route.

Read Our Mission
Geri kazanım tesisi, balya sahası ve konteynerli sevkiyat aracı

FROM COLLECTION
TO RAW MATERIAL

Waste taken from site is weighed, sorted and fed into the recovery line matching its type. It leaves as base oil, granulate or metal ingot and returns to industry.

Our Vision
Ekskavatör kepçesiyle hurda metal yükleme
Balyalanmış ambalaj atıkları ve sevkiyata hazır konteynerli araç

BASED IN OSMANİYE.
İSKENDERUN, HATAY, GAZİANTEP, MARAŞ — AND ALL OF TÜRKİYE.

We are in Osmaniye, right next to İskenderun — the densest concentration of electric arc steel production in Türkiye. Our weekly route covers İskenderun, Hatay, Gaziantep and Kahramanmaraş, and we send a vehicle there even for small lots. Because your scrap goes straight to a mill a few hours away instead of passing from broker to broker, the haul is short and the figure we can pay per tonne is higher. Beyond that route we travel wherever enough tonnage builds up.

  • Osmaniye (base)
  • İskenderun
  • Hatay
  • Gaziantep
  • Kahramanmaraş
  • Adana
  • Mersin
  • All provinces of Türkiye

WHERE WE WORK

Factory and production plant

Process waste, waste oil and contaminated packaging

Automotive and industrial estate

Waste mineral oil, oil filters and battery collection

Logistics and warehouse

Wooden pallets, stretch film, cardboard and plastic sorting

Construction and site

Scrap metal, packaging waste and paint/chemical containers

Municipality and estate management

Zero-waste rollout, collection points and reporting

TELL US ABOUT YOUR WASTE — WE WILL PUT THE SOLUTION IN WRITING.

The waste type and a rough volume are enough to start. If needed we take a sample and come to see your site.

REQUEST A QUOTE

BLOG

From waste codes to zero-waste certificates, from waste oil rebates to packaging declarations.